Screening Bucket DRX S 800 Bucket Screener

The DRX Screener’s compact and stable structure ensures a reliable screening capacity with low running costs. This machine enables materials to be classified and separated more precisely. The exchangeable grids allow for sieving and screening in different, variable sizes. The grids can be used for pre-filtering (prior to crushing) and for final classification purposes. These products are used for working with natural rock, for recycling and in agriculture. We take pride in ensuring that all our materials and components are top quality. With its ergonomic shape and innovative design, the Drx Screener’s modern look typifies the whole Drx product range.
Perfect for the selection of natural materials, both before and after the crushing phase, the DRX S screening buckets reduce crushing times by up to 65%, consequently allowing you to salvage materials suited to the type of job being carried out and to manage them in the best way possible.

Drx , The only screening bucket , that can have a hydraulic intermittant system , thereby making it possible to also consider wet materials and increase production by 35% compared to the old solutions.

Primary selection of scrap material, demolition material, filling material for excavations, and material resulting from the reclamation of rocky soil
Selection of pebbles in waterways
Cleaning of beaches
A crucial piece of equipment in all situations were smaller pieces need to be obtained

Ideal for use before or after crushing, the screening bucket will reduce crushing time up to 60%. The DRX S Drx Screening Bucket also allows the screening of natural material (quarry residues, dry soil, and river stone) of any kind, making it convenient for on-site processing.

A must in reducing volumes and optimizing the size of materials for specific uses

PRIMARY SELECTION:
WASTE MATERIAL
DEMOLITION MATERIAL
EXCAVATION FILLING MATERIAL
RECLAMATION OF STONY LAND
PEBBLES IN STREAMS
DEBRIS IN BEACHES
NATURAL STONES CLEANING

 

MODELS DRX S 800 DRX S 1200 DRX S 1600 DRX S 2000
Excavator weight t ≥ 8 ≥ 13 ≥ 22 ≥ 35
Screen drum diameter mm 800 1200 1600 2000
Screen drum depth mm 550 800 1200 1200
Oil pressure bar 130 170 170 170
Oil flow l/min 20 75 75 120
Load volume m³ 0.25 0.80 1.90 3.40
Total capacity m³ 0.51 1.57 3.70 5.95
Dimensions / Weight
Length mm 1790 2390 3140 3740
Width mm 935 1355 1850 2210
Height mm 1190 1600 2130 2230
Weight kg 640 1220 2320 4600

vente de lingerie pas cherкупить стрейчsite de sous vetement pas cher

Mobile Washing and Screening Plants 616

Mini Screen Dragon 606 – Mobile Mini Screening Plant

Full Mobile Mini Screening  Plant DRAGON 606

The entire system of the Dragon 606 mini mobile screening system is collected on a single platform and can be transported by many vehicles such as trucks, trucks, tractors, land vehicles. Designed for shortly installation .It can do alone the work of classical plants . These are currently the most preferred machines in the World and Turkey market.

Existing machinery and equipment in the system;

* Vibrating Screen System High Capacity:
Screen Size : 1800 x 1500 mm
Motor Power : 2.2 kw
Number Of Decks : 2 Decks
Special type bearing suitable for vibration

* Stock Conveyor
It is 800 mm wide and foldable type.
Drive drums are rubber coated and threaded.
The gear units are 3 transmission type and the new generation is with torque connection system.
A side scraper system is available to prevent spillage of the final product into the stock area during casting.
By means of the sputter collecting system, material drop is provided around the groove. The two stock conveyors are all folding type and have a large under-sieve stock area. A total of 2 products can be obtained from the mobile screen system.

* Over Deck Conveyor
400 mm wide folding type.
Drive drums are rubber coated and threaded.
The gear units are 3 transmission type and the new generation is with torque connection system.
A side scraper system is available to prevent spillage of the final product into the stock area during casting.

* Mobile Chassis System
It is equipped with single axle, air brake and signaling system. Special heavy duty construction chassis. There is a manually adjustable foot mechanism.

* Panel and Control System
The material is Siemens branded. The panel system has a remote control system that operates with radio control frequency. In addition, the panel system is specially insulated against dust and water.

* All functions can be controlled with Remote Control (Radio Control System).

– The dust suspension control  system prevents dusting by spraying the high pressure water nozzle to press the dust on the main conveyor.
– Electric Motors IE2 is a highly efficient type.
– Conveyor belt systems are suitable for long use with 10 mm thickness with EP 125 and EP 160 cortex.
– Bearings are SKF or equivalent.

Total Motor Power: 9 kw
Capacity is variable according to the material feed and final product dimensions to be broken and it is 30 – 80 tons capacity.

Optional Features
– Extra stock conveyor (Optional) .
– The Generator System is optional and is powered by diesel engines from Cummins, Perkins, Doosan, Deutz and Marelli or Stanford alternators. (Optional)
– Dust suspension control system (Optional)

 

аудит сайта стоимостьgrammatical check online freeупаковочная пленка стрейч

Mobile Tertiary Crushing Plant Dragon 35

DRAGON Mobile Tertiary Crushing and Screening Plant
DRAGON 35
Dragon 35’s all equipments are at only one platform. It can be transferred by just one track and it provides easy of transport. It designed for establishing at small areas in short time. In our system, we have latest technology crusher which is capable of doing alone what the other crushers can be made.

Technical Features: Capacity: 50 – 100 t/h
Mobile Chassis , 1 axle chassis
Wheel suspension
Total ten(10) blocking legs four(4) of them hydraulically operated
Airbrakes, running lights, and mud flaps
Fixed walkways on both sides with hand rails
Access ladder to chassis
Hydraulic Levelling System
Hopper and Feeder
Tertiary Crusher
Rotor Size : 600 x 1100mm
New Generation, New System Crusher
Strong body, strong rotor, strong setting blocks
75 – 90 kW
Easy setting mechanism
Both sides usable pallets
Dragon Screen High Capacity Type
Deck  :  2 Deck
Screen Size :1200x 3000 mm
2 Deck high capacity
Motor : 11 kW
Main Conveyor Belt
600 mm
Motor: 5.5 kW
Stock Conveyors (2 Units)
1 Unit: 500 mm stock conveyor belt
Motor : 3 kW
1 Unit: 600 mm stock conveyor belt
Motor : 4 kW
Feedback Conveyor (1)
500 mm
Motor: 4 kW
Feedback Conveyor (2)
500 mm
Motor: 4 kW

Remote Control For One-Man-Operation.
Hydraulic System

Siemens Brand Electrical Equipment

Standard Equipment

Dust Control System – Dust Reduction

Optionals

* Generator ( Cummins ,Perkins , Cat , Doosan ) Engine power 450 kva generator  (Optional)

* Magnet Conveyor Belt ( Optional )

Total Motor Power: 130 kW

Output Sizes: 0 – 5 mm (As Requested)

Maximum Feeding Size: 0 – 150 mm

Total Weight: 25,000 kg
Transport Dimensions (WxHxL): 3200x4500x13800 mm

 

оптимизация seospell checпаллетоупаковщик купить

Mobile Conveyor Belt 1

Mobile Conveyor Belt 1000 x 25000 mm

Mobile Conveyor Belt  1000 x 25000 mm

 

The Dragon Series of conveyors has been developed to Maximise production capacities and minimise operating costs. They are designed to work in conjunction with the entire range of Dragon machinery to optimise stock pile capacities and reduce on-site material handling costs.

The versatility of the Dragon Conveyor Series means they can be used within almost any mobile or static crushing or screening application, e.g, sand & gravel, concrete, recycled materials, coal, top soil, to name a few.

The ability of the Dragon Conveyor Belt to radial further reduces on site material handling costs and improves stock piling capacity. The heavy duty construction and high quality parts used throughout the Dragon range are continued in the Conveyor Series of conveyors to ensure you have the maximum output with the minimum fuss.

The hydraulic folding head section in the Conveyor Series allows for fast efficient road transportation and the machine has a typical set-up time off less than 10 minutes. ( Optional )

MOBILE CONVEYOR BELT SYSTEM
Type SB-1000
Dimension 1000 x 25000 mm
System Profile and twisted steel material
Power 11 kW  1500 rpm
Power transmission Power transmission by V belt and pulleys
Reductor GMC 5050
Belt connection Endless type hot press connection

 тайланд дайвинг снорклингсайтsearch engine optimization sites

Mobile Screening Plants – 615

Model Max. Feeding Size  Capacity (t/h)    Final Size mm
(Adjustment Type)
 Motor Power (kW)
 Dragon 615   3 deck – 4 product  250 – 400 t/h  Adjustment Type  60 Kw

DRAGON 615 – Mobile Screening Plant New Technology The entire system of the Dragon 615 Mobile Screening System is assembled on a single platform and can be transported with a truck. Designed to be installed within an hour .Can do the work alone of  the classical plants. We are currently the most preferred machines in the World and Turkey market.

Existing machines and equipment in the system;

* Bunker feeding hopper
It is a bunker system with a volume of 6 m3 and the upper part of this bunker system is Girzzly grate. It prevents large items from entering the hopper. It runs smoothly and with minimal maintenance requirements.
Thanks to the hydraulic system, heavy materials are poured out by lifting the lower pistons.
The additional hopper is optional and additional hopper can be purchased if trucking is desired.

* Feeder System
Feeding Size  : 1000 mm
There is also a manual adjustment mechanism in the feed system. Thanks to this mechanism, the feed density can be adjusted.

* Main Conveyor Belt System:
It is 1000 mm wide and is of palette type.
Drive drums are rubber coated and threaded.
The gear units are 3 transducer type “K” and the new generation is a system with torque connection.
Side scraper system is available to prevent outflow.
By means of the sputter collecting system, material drop is provided around the groove.

* Vibrating Screen System High Capacity:
Screen Sizes : 1st Floor 1500 mm X 4360 mm 2nd Floor: 1500 mm X 4000 mm 3rd Floor: 1500 mm X 3700 mm
Motor Power: 5 kw
Number Of Decks : 3 Decks
Special type suitable for vibration.

* Under-Sieve Stock Conveyor  Belt System
It is 1000 mm wide and foldable type. Drive drums are rubber coated and threaded. The gear units are 3 transmission type and the new generation is with torque connection system. A side scraper system is available to prevent spillage of the final product into the stock area during casting. Material collection around the groove is achieved thanks to the collecting system. All three stock conveyors are folding type and have a large under-sieve stock area. A total of 3 products can be obtained from the mobile screen system. Hydraulic system is used in the system to ensure ease of operation. The mobile screening system is fixed thanks to the hydraulic system and feet.

* Stock Conveyor  Belt System
There are two 500 mm wide folding type. Drive drums are rubber coated and threaded. The gear units are 3 transmission type and the new generation is with torque connection system. A side scraper system is available to prevent spillage of the final product into the stock area during screening.

* Mobile Chassis System
It is equipped with 2 axle, air-operated brake system and signaling system. Special heavy duty construction chassis. Hydraulic system has 4 hydraulic foot mechanisms. These feet are strengthened by the fixed feet after they are locked. Hydraulic Power System thanks to 105 liter, all pistons are controlled by special control system.

* Panel and Control System
The material is Siemens branded. The panel system has a remote control system that operates with radio control frequency. In addition, the panel system is specially insulated against dust and water.

* All functions can be controlled with Remote Control (Radio Control System).
– The dust suspension control system prevents dusting by spraying the high pressure water nozzle to press the dust on the main conveyor. – Electric Motors IE2 is a highly efficient type.
– Conveyor belt systems are suitable for long use with 10 mm thickness with EP 125 and EP 160 cortex.
– Bearings are SKF or equivalent.

Total Motor Power: 60  kw
Final Product Size: In Desired Sizes The capacity is variable according to the material feed and final product dimensions to be broken and it is 250-400 tons capacity.

*Additional Standard Features in the System
– Dust Suspension Control System

*Optional Features 
– Additional hopper for truck feeding (Optional)
– The Generator System is optional and is powered by diesel engines from Cummins, Perkins, Doosan, Deutz and Marelli or Stanford alternators. (Optional- Opening and closing feature of stock conveyor with hydraulic piston (Optional)

** Weight: 29.400 kg

All of our products are CE certified.

 

achat lingerie coquinewebdesign usabilityмошенничество украина

Dragon 608-İNG(1)

Mobile Screening Plants – 608

Models Max. Feeding Size  Capacity (t/h)    Final Size mm
(Adjustment Type)
 Motor Power (kW)
Dragon 608 2 deck – 3 product  130 – 220 t/h Adjustment Type  33 Kw

Mobile Screening Plants Dragon 608

DRAGON 608 – Mobile Screening Plant New Technology The entire system of the Dragon 608 Mobile Screening System is assembled on a single platform and can be transported with a truck. Designed to be installed within an hour .Can do the work alone of  the classical plants. We are currently the most preferred machines in the World and Turkey market.

Existing machines and equipment in the system;

* Bunker feeding hopper
It is a bunker system with a volume of 6 m3 and the upper part of this bunker system is Girzzly grate. It prevents large items from entering the hopper. It runs smoothly and with minimal maintenance requirements.
Thanks to the hydraulic system, heavy materials are poured out by lifting the lower pistons.
The additional hopper is optional and additional hopper can be purchased if trucking is desired.

* Feeder System
Feeding Size : 750 mm
There is also a manual adjustment mechanism in the feed system. Thanks to this mechanism, the feed density can be adjusted.

* Main Conveyor Belt System:
It is 800 mm wide and is of palette type.
Drive drums are rubber coated and threaded.
The gear units are 3 transducer type “K” and the new generation is a system with torque connection.
Side scraper system is available to prevent outflow.
By means of the sputter collecting system, material drop is provided around the groove.

* Vibrating Screen System High Capacity:
Screen Size : 1500 x 4000 mm
Motor Power: 11 kw
Number Of Decks : 2 Decks
Special type suitable for vibration

* Under-Sieve Stock Conveyor  Belt System
It is 800 mm wide and foldable type. Drive drums are rubber coated and threaded. The gear units are 3 transmission type and the new generation is with torque connection system. A side scraper system is available to prevent spillage of the final product into the stock area during casting. Material collection around the groove is achieved thanks to the collecting system. All three stock conveyors are folding type and have a large under-sieve stock area. A total of 3 products can be obtained from the mobile screen system. Hydraulic system is used in the system to ensure ease of operation. The mobile screening system is fixed thanks to the hydraulic system and feet.
,
* Stock Conveyor  Belt System
There are two 500 mm wide folding type. Drive drums are rubber coated and threaded. The gear units are 3 transmission type and the new generation is with torque connection system. A side scraper system is available to prevent spillage of the final product into the stock area during screening.

* Mobile Chassis System  Belt System
It is equipped with 2 axle, air-operated brake system and signaling system. Special heavy duty construction chassis. Hydraulic system has 4 hydraulic foot mechanisms. These feet are strengthened by the fixed feet after they are locked. Hydraulic Power System thanks to 105 liter, all pistons are controlled by special control system.

* Panel and Control System
The material is Siemens branded. The panel system has a remote control system that operates with radio control frequency. In addition, the panel system is specially insulated against dust and water.

* All functions can be controlled with Remote Control (Radio Control System).
– The dust suspension control system prevents dusting by spraying the high pressure water nozzle to press the dust on the main conveyor. – Electric Motors IE2 is a highly efficient type.
– Conveyor belt systems are suitable for long use with 10 mm thickness with EP 125 and EP 160 cortex.
– Bearings are SKF or equivalent.

Total Motor Power: 331  kw
Final Size: In Desired Sizes The capacity is variable according to the material feed and final product dimensions to be broken and it is 60 – 130 tons capacity.

*Additional Standard Features in the System
– Dust Suspension Control System

*Optional Features 
– Additional hopper for truck feeding (Optional)
– The Generator System is optional and is powered by diesel engines from Cummins, Perkins, Doosan, Deutz and Marelli or Stanford alternators. (Optional)
– Opening and closing feature of stock conveyor with hydraulic piston (Optional)

** Weight: 15 tons

All of our products are CE certified.

продвижение медицинской клиникидайвинг турпомощь при рождении ребёнка

Mobile Primary Crushing And Screening Plant,Dragon 9000

Models Max. Feeding Size (mm) Capacity (t/h)  Final Size mm
(Adjustment Type)
Motor Power (kW)
Dragon 9000 900 x 650 mm 100 – 240 t/h 0 – 180 mm 122 Kw-142 Kw

Mobile Primary Crushing And Screening Plant,Dragon 9000

The Dragon 9000 primary crushing screening system is all collected in one platform and can be transported by a truck. The Dragon is specially designed by the R&D group to be installed within a short time. The work that the classical primary crusher can do can be done by itself. At present we are one of the most preferred machines in the world and Turkey market. They are the most suitable crushers for breaking hard materials such as basalt and granite, as well as materials from iron ore, chrome or quartz.

Existing machinery and equipment in the system ;

*Vibrating Feeder and Hopper 
The feeder system is operating with  2 vibromotors ( Italian Brand Oli ) which leads to  low maintenance and trouble-free operations.
The feeder  is suitable for feeding with Excavator and Loader and can be fed as well  with truck with an additional hopper.
All wear points in the feeder and in the hopper are protected by replaceable wear shields. At the points where wear may occur, wear arms are bolted and can be easily replaced.
The additional hopper can be opened and closed by the hydraulic system. This allows easy assembly and disassembly.
The feeding tray has a screening system. In this screening  system there is a zig zag type grill system which can eliminate the large materials easily .
By-pass conveyor allows sifted and thin materials  to be stocked in the stock area , or it can send this materials directly  to the main band by a clapper groove. Thanks to this clapper groove, the mine can be transported to the stock area without entering the stone crusher, or the main band can be fed. This is a factor that increases the capacity.

*DRAGON 9000 JAW CRUSHER 

Jaw Crusher : 900 X 650 mm
Crusher Type : Primary
Motor power : 90 kw
There is setting mechanism which leads to easy configuration.
The rotors are specially manufactured and have replaceable wear shields in their wear exposed parts.

* Main Conveyor Belt System 
It is 650mm wide and is of palette type. Drive drums are rubber coated and threaded. The gear units are 3 transmission type and the new generation is with torque connection system. Side scraper system is available to prevent outflow.

* Grizzly Vibrating Screen System
Screen Size : 1300 X 2500 mm
Motor Power : 7,5 kw
Three different sizes of screening.
Special type bearing suitable for vibration.

* Under-Sieve Stock Conveyor Belt System 
It is 800 mm wide and foldable type. Drive drums are rubber coated and threaded. The gear units are 3 transmission type and the new generation is with torque connection system. A side scraper system is available to prevent spillage of the final product into the stock area during crushing. Foldable with hydraulic piston for easy assembly and disassembly of the system.

* Stock Conveyor Belt System 
800 mm wide folding type.
Drive drums are rubber coated and threaded.
The gear units are 3 transmission type and the new generation is with torque connection system.
A side scraper system is available to prevent spillage of the final product into the stock area during crushing.
Foldable with hydraulic piston for easy assembly and disassembly of the system.

* By-Pass Conveyor Belt System 
It is 500 mm wide.
Drive drums are rubber coated and threaded.
The gear units are 3 transmission type and the new generation is with torque connection system.
Foldable with hydraulic piston for easy installation and disassembly of the system
Side scraper system is available to prevent outflow.

* Mobile Chassis System
It is equipped with 3 axle, air-operated brake system and signaling system. Special heavy duty construction chassis. There are 6 hydraulic feet mechanisms in the hydraulic system. These feet are strengthened by the fixed feet after they are locked.
Hydraulic Power System thanks to 125 litre, all pistons are controlled by special control system.

* Panel and Control System 
The material is Siemens branded. The panel system has a remote control system that operates with radio control frequency. In addition, the panel system is specially insulated against dust and water. Although the used panel is insulated against dust and water, Dragon Machine contains a system that can remove our panel systems from the main scale by about 8 metres.

* All functions can be controlled with Remote Control (Radio Control System).

– The dust suspension control system prevents dusting by conveying high pressure water to the conveyor to spray the dust.
– Electric Motors IE2 is a highly efficient type.
– Conveyor belt systems EP 125 and EP 160 are suitable for long use with 10 and 14 mm thick cortex.
– Bearings are SKF or equivalent.

Total Motor Power: 122 kw
Maximum Feeding Size: 900 X 650  mm
Ideal Feeding Size: 0 – 600 mm
Final Size: Can be set to give a final product of 0 – 180 mm or larger.
Capacity is variable according to the material feed and final product dimensions to be broken and it is 100-240 ton capacity.

Additional Standard Features in the System
– Extra hopper for truck feeding.
– By-pass system and By-pass conveyor.
– Dust Suspension Control System.

Optional Features
– Magnetic Magnet Conveyor Belt (Optional)
– The Generator System is optional and is powered by diesel engines from Cummins, Perkins, Doosan, Deutz and Marelli or Stanford alternators. (Optional)

Weight: 48 tons

All of our products are CE certified.

JAW CRUSHER CLOSED SIDE SETTING CAPACITY (T/H)
Jaw Cursher  900 x 650
Cruser Closed Side Setting (mm) Output Capacity (t/h
20
25
30
40
50
60 50 – 78
70 60 – 80
80 65 – 90
90 72 – 100
100 78 – 110
125 90 – 130
150 105 – 160
175 135 – 200
200 175 – 240
250

** All our products are CE certified by the European Union.

massage sex geneveстоимость сео оптимизациипаллетная стрейч пленка

Mobile Tertiary Crushing Plant Dragon 45

Model  Max. Feeding Size (mm)   Capacity (t/h)    Final Size mm
( Adjustment Type )
 Motor Power (kW)
Dragon 45  0 – 150 mm  75 – 110 t/h  0 – 5 mm  202 Kw

 

DRAGON 45 CLOSED CIRCIUT TERTIARY CRUSHING AND SCREENING PLANT

Closed circuit crushing system is all collected in one single platform and can be transported with a truck. The R-D group has designed this series for short term installation . Dragon Series refers to a crushing /screening closed-circuit plant on one chassis. Offers unsurpassed production of cubical spec products for small, medium, or large jobs. Produces multiple, cubical spec products with three-deck inclined screen. Returns material retained on the top deck to the impactor for further processing. This crushers can easily do the work of classical plants . This machines are the most prefered in Turkish market and the World market .

*Feeding System and Hopper 
System is preferred to prevent sticking , conveyor belt or vibrating feeder can be choosen depending on customer request. Since the supply system operates smoothly, it needs minimum maintenance. Mobile crusher installations with or without sieves are ideal crushers for sand making. The directive is also suitable for conveyor feeding.

*DRAGON 45 NEW GENERATION TERTIARY CRUSHING SYSTEM 

Rotor Size : 1100 X 1100 mm
Crusher type : Secondary Impact Crusher
There is setting mechanism which leads to easy configuration.
The wearing armor is 16-18% manganese and chromium alloy.
The rotors are specially manufactured and have replaceable wear shields in their wear exposed parts.
Motor power : 110 kw
Rotor pallets are 16-18% manganese and chrome alloy. It is also suitable for two-sided use. Longer wear times can be caught on this count.
The setting blocks are 16-18% manganese and chrome alloy. The adjustment blocks have a hydraulic adjustment mechanism for easy adjustment.
The crusher has 2 long type adjustment blocks for thinning. Thanks to these blocks, the thinning curve is very high.
The powerful body is unique thanks to its powerful rotor and powerful adjustment blocks.
It is unprecedented with high reduction rates of up to 50 times.
When a material that can not break into the crusher enters, the hydraulic overload prevention device enters the circuit and the crusher elements are protected.
When a material that can not break enters into the crusher , the hydraulic overload prevention system blocks the circuit and the crusher elements are protected.

* Main Conveyor Belt System
It is 800 mm wide and is of palette type. Drive drums are rubber coated and threaded. The gear units are 3 transmission type and the new generation is with torque connection system. Side scraper system is available to prevent outflow.

* Vibrating Screen System
Screen Size : 1500 X 4500 mm
Vibrating Screen Size : High Capacity
Motor Power: 11 kw
Special type bearing suitable for vibration.

* Under-Sieve Stock Conveyor Belt System
It is 800 mm wide and foldable type. Drive drums are rubber coated and threaded. The gear units are 3 transmission type and the new generation is with torque connection system. A side scraper system is available to prevent spillage of the final product into the stock area during crushing. Foldable with hydraulic piston for easy assembly and disassembly of the system.

* Stock Conveyor Belt System
600 mm wide folding type.
Drive drums are rubber coated and threaded.
The gear units are 3 transmission type and the new generation is with torque connection system.
A side scraper system is available to prevent spillage of the final product into the stock area during crushing.
Foldable with hydraulic piston for easy assembly and disassembly of the system.

* Feedback Belt System 1
It is 600 mm wide.
Drive drums are rubber coated and threaded.
The gear units are 3 transmission type and the new generation is with torque connection system.
Side scraper system is available to prevent outflow.

* Feedback Belt System 2
It is 600 mm wide and is of palette type.
Drive drums are rubber coated and threaded.
The gear units are 3 transmission type and the new generation is with torque connection system.
Side scraper system available to prevent outflow.

* Mobile Chassis System 
It is equipped with 2 axle, air-operated brake system and signaling system. Special heavy duty construction chassis. There are 6 hydraulic feet mechanisms in the hydraulic system. These feet are strengthened by the fixed feet after they are locked.
Hydraulic Power System thanks to 125 litre, all pistons are controlled by special control system.

* Panel and Control System 
The material is Siemens branded. The panel system has a remote control system that operates with radio control frequency. In addition, the panel system is specially insulated against dust and water. Although the used panel is insulated against dust and water, Dragon Machine contains a system that can remove our panel systems from the main scale by about 8 metres.

* All functions can be controlled with Remote Control (Radio Control System).

– The dust suspension control system prevents dusting by conveying high pressure water to the conveyor to spray the dust.
– Electric Motors IE2 is a highly efficient type.
– Conveyor belt systems EP 125 and EP 160 are suitable for long use with 10 and 14 mm thick cortex.
– Bearings are SKF or equivalent.

Total Motor Power: 202 kw
Maximum Feeding Size: 150 mm
Final Size: Can be set to give a final product of 0-10mm or 0-20mm or larger. (0 – 5 mm and 0-10 mm both be obtained at the same time or apart )
Capacity is variable according to the material feed and final product dimensions to be broken and it is 75-100 ton capacity.

*Additional Standard Features in the System
– Extra hopper for truck feeding.
– Dust suspension control System.

*Optional Features
– Magnetic Magnet Conveyor Belt (Optional)
– The Generator System is optional and is powered by diesel engines from Cummins, Perkins, Doosan, Deutz and Marelli or Stanford alternators. (Optional)
-Hydraulic band opening and closing system
** Weight: 38 tons
All of our products are CE certified.

продвижение имиджапродвижение сайтовgoogle speed checker